VREFSEL=VBGR, PRSSEL=PRSCH0
Scan Control Register Continued
| VREFSEL | Scan Channel Reference Selection 0 (VBGR): Internal 0.83V Bandgap reference 1 (VDDXWATT): Scaled AVDD: AVDD*(the VREF attenuation factor) 2 (VREFPWATT): Scaled singled ended external Vref: ADCn_EXTP*(the VREF attenuation factor) 3 (VREFP): Raw single ended external Vref: ADCn_EXTP 5 (VREFPNWATT): Scaled differential external Vref from : (ADCn_EXTP-ADCn_EXTN)*(the VREF attenuation factor) 6 (VREFPN): Raw differential external Vref from : (ADCn_EXTP-ADCn_EXTN) 7 (VBGRLOW): Internal Bandgap reference at low setting 0.78V |
| VREFATTFIX | Enable Fixed Scaling on VREF |
| VREFATT | Code for VREF Attenuation Factor When VREFSEL is 1, 2 or 5 |
| VINATT | Code for VIN Attenuation Factor |
| DVL | Scan DV Level Select |
| FIFOOFACT | Scan FIFO Overflow Action |
| PRSMODE | Scan PRS Trigger Mode |
| PRSSEL | Scan Sequence PRS Trigger Select 0 (PRSCH0): PRS ch 0 triggers scan sequence 1 (PRSCH1): PRS ch 1 triggers scan sequence 2 (PRSCH2): PRS ch 2 triggers scan sequence 3 (PRSCH3): PRS ch 3 triggers scan sequence 4 (PRSCH4): PRS ch 4 triggers scan sequence 5 (PRSCH5): PRS ch 5 triggers scan sequence 6 (PRSCH6): PRS ch 6 triggers scan sequence 7 (PRSCH7): PRS ch 7 triggers scan sequence 8 (PRSCH8): PRS ch 8 triggers scan sequence 9 (PRSCH9): PRS ch 9 triggers scan sequence 10 (PRSCH10): PRS ch 10 triggers scan sequence 11 (PRSCH11): PRS ch 11 triggers scan sequence |
| CONVSTARTDELAY | Delay Next Conversion Start If CONVSTARTDELAYEN is Set |
| CONVSTARTDELAYEN | Enable Delaying Next Conversion Start |